Specifications

5.3. Learn Rule

You can enter the sensor RF code or MAC address manually to assign area and zone

number to this sensor. Sensors learned with pre-assigned rule will be put under the area and

zone number you specified. This function does not work with Z-Wave devices and DECT device.

Step 1. Click Learn Rule.

Step 2. You will see the Add Learn Rule menu.

Step 3. Select Area and Zone number for this device.

Step 4. Select RF or .

Step 5. Key in the RF code or MAC info

Step 6. For device, select a Device Type

Step 7. Enter a preferred name for sensor (up to 31 letters or numbers).

Step 8. Press “OK” to save.

Step 9. If the process is successful, the screen will display “Updated Successfully.” You can

then check, edit or delete the rule under the Learn Rule menu.

Step 10 Repeat the steps to add more rules.