User's Manual

10.6. Event Code
 100 – Medical
 When a device set to Medical attribute is triggered.
 101 – Personal emergency
 When a device set to Personal Emergency attribute is triggered.
 110 – Fire
 When a device set to Fire attribute is triggered.
 111 – Smoke
 When the Smoke Detector (SD) set to Smoke Alarm is triggered.
 When the Smoke Detector (SD) set to Fire Verification verifies an alarm during Fire
Verification Time.
 118 – Near Alarm
 When the Smoke Detector (SD) set to Fire Verification is triggered.
 120 – Panic
 When a device set to Panic attribute is pressed.
 121 – Duress
 When the Duress Code is entered to disarm or arm the system.
 122 –Silent Panic
 When a device set to Silent Panic is pressed.
 130 – Burglar
 Whenever a device set as Burglar Instant is triggered.
 Whenever a device set as Burglar Instant is triggered under Disarm, Full Arm or
Home Arm mode.
 131 – Burglar Perimeter
 When a device set as Entry is triggered in Full Arm mode.
 When a device set as Burglar Follow is triggered during Full Arm Entry Time and the
system is not disarmed before entry time expiry.
 132 – Burglar Interior
 When a device set at Entry is triggered in Home Arm mode.
 When a device set as Burglar Follow is triggered during Home Arm Entry Time and
the system is not disarmed before entry time expiry.
 136 – Burglar Outdoor
 Whenever a device set at Burglar Outdoor is triggered.
 137 – Panel Tamper/ Panel Tamper Restore
 When the panel’s tamper protection is triggered.
 When the panel’s tamper function is restored.
 139 – Burglar Verified.
 When a sensor set to Cross Zone attribute verifies an alarm.
 147 – Sensor Supervision Failure/ Sensor Supervision Restore
 When the panel fails to receive supervision signal from a device within preset
85