User's Manual

 Area
Each Area has different Duress Code, Master Code, and Temporary Code. Select the Area
to program the code setting in this area.
 Duress Code
The Duress Code is designed for transmitting a secret & silence alarm.
When Duress Code is used for accessing the system, the Control Panel will report a
secret alarm message without sounding the siren to the Central Monitoring Station to
indicate of a Duress Situation in Progress.
The Duress Code consists of 4-6 digits and is not activated as default by the factory.
 Guard Code
The Guard Code is designed for security patrol personnel to arm/disarm the system. It can
be set the same as a User PIN Code.
The Guard Code consists of 4-6 digits and is not activated as default by the factory.
 Master Code
This function is currently disabled.
 Temporary Code
Temporary Code is also used to arm/disarm the system, but it is for a temporary user. The
temporary Code is ONLY valid for one-access per arming and disarming. Afterwards, the
Temporary Code will be automatically erased and needs to be reset for a new Temporary
user.
The Temporary Code consists of 4-6 digits and is not activated as default by the factory.
 Latch Option
This is to program the Latch Key Reporting feature for Temporary Code. Please click the
box to select the options.
Latch  Latch Report ON = Whenever the system is armed, home/ day home/ night
home armed or disarmed, the Panel will transmitt Contact ID code / SMS message /
GPRS reporting (according to pre-setting) to notify the Central Monitoring Station.
Latch  Latch Reprot OFF = Whenever the system is armed, home/ day home/ night
home armed or disarmed, the Panel will NOT transmit reporting(s) to notify the Central
Monitoring Station.
 Delete
Except Master Code which can’t be disabled in any way, Temporary and Duress Code can
be disabled by cleaning the code box and leaving the box as blank.
62