User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Panel Information
- 3. Getting Started
- 4. Connection to Panel Webpage
- 5. Device Management
- 6. Program the System
- 7. Network Settings
- 8. System Settings
- 9. Event & History
- 10. Appendix
- Federal Communication Commission Interference Statement
Mode Change and Exit Timer Stopped : When set as Mode Change and Exit Timer
Stopped, when the system changes mode to and Exit Delay Timer expires, , the rule
will be activated according to rule schedule and execution setting.
Mode Start Entry Timer : When set as Mode Start Entry Timer, when the system
begins to countdown Entry Delay, the rule will be activated according to rule schedule
and execution setting.
Temperature Below : When set as Temperature Below, if the temperature detected
by specified temperature sensor drops below set threshold, the rule will be activated
according to rule schedule and execution setting.
Temperature Above : When set as Temperature Below, if the temperature detected
by specified temperature sensor exceeds set threshold, the rule will be activated
according to rule schedule and execution setting.
Temperature Between : When set as Temperature Between, if the temperature
detected by specified temperature sensor falls within the range specified, the rule will
be activated according to rule schedule and execution setting.
High Power Consumption : When set as Power Consumption Above, if the power
output watt from a specific Power Switch exceeds, the rule will be activated according
to rule schedule and execution setting.
Humidity Above : When set as Humidity Above,if the humidity reading from specified
room sensor rises above the level specified, the rule will be activated according to rule
schedule and execution setting.
Humidity Below : When set as Humidity Below,if the humidity reading from specified
room sensor falls below the level specified, the rule will be activated according to rule
schedule and execution setting.
52