User's Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Panel Information
- 3. Getting Started
- 4. Connection to Panel Webpage
- 5. Device Management
- 6. Program the System
- 7. Network Settings
- 8. System Settings
- 9. Event & History
- 10. Appendix
- Federal Communication Commission Interference Statement
1.1. System Specification
Function
Control Facilities R
emote Keypad & Remote Controller
Alarm Transmission Path Built-in Module: RF + RJ45 port (IP Connection) + 4G*
Report Destinations 20 Monitoring Stations or mobile number
Arming Modes Away, Home 1, Home 2, Home 3
Alarm Type Burglar, Panic, Fire, Medical, Emergency, Water, Silent
Supervision Programmable time frame for inactivity alert
GSM Standards Compiles with CE & FCC standards.
Specifications
CPU, RAM CPU: i.MX 6ULL MCIMX6Y1DVM05AB NXP
RAM: DDR3L SDRAM MT41K256M16TW (4Gbit)
Flash Flash: NOR FLASH MT25QL256ABA 256Mbit and eMMC 4GBytes
Electrical
External AC adaptor Input: AC 100-240V, 50 / 60Hz, Output: DC 12V 1A
Backup Battery 1600mAh, Ni-MH rechargeable battery pack
Battery Recharge Time 72 hours
Battery Backup Time 30 hours**
Current Drain AC Powered Approx. 126mA / 12V standby
Battery Powered Approx. 44mA / 7.2V Suspend
Wireless
2