User's Manual

20
Step 6. Enter a preferred name for sensor (up to 31 letters or numbers).
Step 7. Press OK to save.
Step 8. If the process is successful, the screen will display Updated Successfully. You can
then check, edit or delete the rule under the Learn Rule menu.
Step 9 Repeat the steps to add more rules.
Step 10. Learn in the sensors you have entered rules for according to 5.1.1 Add Sensor.
<NOTE>
Learn rule function is only used to pre-assign area and zone number to sensors before
learning. To add senor to control panel, you still need to follow the instruction in 5.1.1
Add Sensor to complete the learning process.