User's Manual
19
Step 2. Select Area and Zone number for the device you wish to add into system.
Step 3. Enter the device RF code, and preferred device name (up to 31 characters)
Step 4. Press “OK” to save
Step 5. If the RF code you entered is valid, the device will be added into the system according
to the Area and Zone number. You do not need to learn the device as instructed in
5.1.1. Add Sensor.
5.3. Learn Rule
You can enter the sensor RF code or manually to assign area and zone number to this sensor.
Sensors learned with pre-assigned rule will be put under the area and zone number you
specified. This function does not work with Z-Wave devices and DECT device.
Step 1. Click Learn Rule.
Step 2. You will see the Add Learn Rule menu.
Step 3. Select Area and Zone number for this device.
Step 4. Select RF.
Step 5. Key in the RF code info