User's Manual

15
Step 3. Edit your device setting and information according to instruction below. Click “OK” to
save your new changes when finished. Alternatively, click “Default” to reset all
parameters to default values or click “Reset” to re-enter all the information.
 Name: Enter a name for the device.
 Area: Select the area which the device belongs to.
 Zone: Select the Device zone number.
 Attribute List:
The attribute list determines panel behaviour when the panel receives trigger signal from
the device. There are
General Attribute:
 Permanentlyt Bypass
This function allows user to permanently deactivate (bypass) the selected device.
 If bypassed, then the Control Panel will not respond at all when the sensor is
triggered.
 If bypassed, the system can be armed directly regardless the device’s fault
situation. However, its fault situation will still be monitored, logged and displayed
in the webpage.
 Latch report