User's Manual

Step 4. After finish learning all devices, press and holde the Learn button for 1 second. The

Control Panel will emit 2 short beeps to indicate it has returned to normal mode. LED1

will dim.

<NOTE>

 Device learnt in via Local Learning will be assigned to Area 1 only, which is limited to 80

devices.

 The Control Panel cannot enter learning mode when under Away Arm/Home Arm or

Walk Test mode. The Control Panel will emit 5 beeps to indicate error.

5.1.3. Edit Devices

After finish learning devices, proceed to edit the device setting.

Step 1. Click Panel to enter Panel webpage. All learnt in devices will be displayed under

Device List section.

Step 2. To edit the device setting or information, click “Edit” at end of device entry.

Step 2. You will enter Device Edit webpage