User's Manual


Screw Mounting
The Base has two knockouts, where the plastic is thinner, for mounting
purpose.
To mount the Door Contact:
I. Remove the cover by unscrewing the Cover Securing Screw using a
Philips screwdriver.
II. Break through the knockouts on the base.
III. Using the holes as a template. Drill both holes.
IV. Insert wall plugs if fixing into plaster or brick.
V. Screw the base into the wall plug using a Philips screwdriver.
VI. Attach the cover to the base and tighten the Cover Securing Screw.
3