User's Manual

33
DTMF
CHARACTER
COMMANDS
DTMF
ACK
COMMAND OPERATION
TERMI-
NATOR
DTMF
ACK
DEFAULT
43# Bi
Test call, 0 = OFF, 1 = 1 Day, 2 = 2 Days,
3 = 3 Days, 4 = 4 Days. 5 = 5 Days,
6 = 6 Days, 7 = 7 Days, 8 = 30 days
# Bi No test call
44# Bi
Mobility time
0= Disable, 1=12 Hour, 2=24 Hour
# Bi
Mobility time
disable
45# Bi
Follow-On Choice, 0 = Wait command,
1 = Listen, 2 = Two way voice communication
# Bi
Two-way voice
communication
46# Bi
Follow
-
On mode & Two
-
Way Period,
01=1 min, 02=2mins, 03=3mins, 04=4mins,
05=5mins, 06=6mins, 07=7mins, 08=8mins,
09=9mins, 10=10mins.
# Bi 2 minutes
47# Bi
Off
-
set time, 1=1 hour, 2=2 hours, 3=3 hours,
4=4 hours, 5=8hours, 6=12 hours
# Bi 1 Hour
49# Bi
Supervision
0 = disable, 1 = 4 days, 2 = 5 days, 3 = 6 days,
4 = 7 days, 5 = 8 days, 6 = 9 days, 7 = 10 days,
8 = 30 days
# Bi Disable
66# Bi
Guard time delay for Fall Sensor, 00 = Instant
reporting; … 99 = 99 seconds
# Bi 15 sec
67# Bi
Help Arrived Timer
01-15 = 1-15 minutes
# Bi 15 minutes
75# Bi Help Not Arrived Call # Bi No number
80# Bi Remove all device (learnt in Command 91-94) --- --- ---
81# Bi Remove pendant #1 (learnt in Command 91) --- --- ---
82# Bi Remove pendant #2 (learnt in Command 92) --- --- ---
83# Bi
Remove Silent Pendant
(learnt in Command 93)
--- --- ---
84# Bi Remove the Devices (learnt in Command 94) --- --- ---
91# Bi Learn-in pendant #1 --- Bi Bi No device
92# Bi Learn-in pendant #2 --- Bi Bi No device
93# Bi Learns-in silent emergency transmitters --- Bi Bi No devices
94# Bi
Learn
-
in smoke detectors, CO detectors,
pendants and fixed emergency transmitters,
long range pendants
--- Bi Bi No device
98# Bi
Load defaults when ＊＊
＊＊＊＊
＊＊ is pressed (DTMF A
is heard after defaults have been loaded)
# Bi ---
99# Bi Exit programming mode ---