User's Manual

10
<
<
N
N
O
O
T
T
E
E
>
>
 The Tel. number selected in
Command #7 will not be used for
alarm and/or status reporting, even if it
is selected in command #5 and/or #6.
 When multiple Tel. numbers are
selected, CTC-1041RV will always
dial in respective programmed order.
 The latest Command (05-06) setting(s)
will overwrite any previously enter
setting(s).
Command 07
Select Telephone Number for Non-
emergency call
 This command is used to select which
telephone number will be used for non-
emergency call.
 The selected Tel. number will not be used
for alarm and/or status reporting, even if it
is selected in command #5 and/or #6.
 Available key-in options:
Tel. Number
Function Selection
Sequence
Disable
(0)
1
st
Tel. #
(1)
2
nd
Tel. #
(2)
3
rd
Tel. #
(3)
4
th
Tel. #
(4)
 Factory default is set as (0) disable. Alarm
& Status will be reported to all of 4
Telephone Numbers.
 Please refer to section 4.1.2 for more
information.
Command 10-14
Account Number Programming
 Commands (10-14) are used to set the
account number for the telephone numbers
used for Digital Reporting.
 Command (10): Set the same account
number for all telephone numbers.
 Command (11-14): Set the account
numbers for the 1
st
-4
th
Tel. numbers used
for Digital Reporting respectively.
 In (Function Selection) key in 4 or 6 digit
Account Number.
Command 20-24
Reporting Method
 Commands (20-24) are used to program
the Alarm reporting method for each Tel.
Number.
 Command (20): Program the same Alarm
Reporting Method for all 4 Tel. Numbers.
 Command (21-24): Program the alarm
reporting method for the 1
st
-4
th
Tel.
Numbers respectively.
 Available Options:
Method
Function
Selection
Digital
Reporting
Method
(0) Contact ID
(1) Scancom
(2) Tunstall
Speech
Method
(3)
Open Two-way
communication
 (0), Contact ID, is set as factory default for
all 4 telephone Numbers.
<
<
N
N
O
O
T
T
E
E
>
>
 The latest Command (20-24) setting(s)
will overwrite any previously entered
setting(s).
 If any of Digital Reporting Methods
is selected:
Once alarm or emergency data is
successfully transmitted, CTC-1041RV