User's Manual

8
 To exit Remote Programming mode,
enter 99 followed by #.
3.1.3. CTC-835 Programmer
CTC-835 is a powerful local & remote
handheld programming tool (sold separetely)
that features a built-in keypad and LCD display
to help you to program the medical alarm
panels effeciently and conveniently. It also
features Once-for-All Uploading, which
allows you program on a computer via the
supplied Pilot software and you can then
upload all the settings to the medical alarm
panel simultaneously with a single mouse click.
For detailed usages, please refer to the
Operation Manual of CTC-835 Programmer.
3.2. Programming Your
1041RV
 How to enter Commands?
Please make sure CTC-1041RV is in
Programming Mode (RED LED flashes
continuously) before trying any CTC-
1041RV Command Functions. Please refer
to section System Configuration, Entering
Programming Mode.
 Follow the protocol below to command
CTC-1041RV:
CC # DTMF
ACK
Function
Selection
#
DTMF
ACK
1. 2. 3. 4. 5. 6.
1. CC = 2-digit DTMF Command
2. # = Termination of the DTMF Command
3. ACK = DTMF Command
Acknowledgement from CTC-1041RV
Short beep: Command succeeded
Long beep: Command failed
4. Function Selection = According to
different Command you will have different
entering in this part, e.g. Tel. Number,
Account number, etc.
5. # = Terminates Function Selection
6. ACK = Function Selection
Acknowledgement from CTC-
1041RV
Short beep: Function Selection succeeded
Long beep: Function Selection failed
 Follow the Command Steps to program
your CTC-1041RV:
Step 1. Enter Command number (DTMF
Numeric Command, ex. (01), (02)…)
Step 2. Press (#) to terminate the DTMF
Command.
Step 3. One short beep will be heard for
successful Command entry.