Instruction manual

FAN OPERATION MODES
23INSTRUCTION MANUAL
DE-HUMIDIFY AND HUMIDITY SETPOINT
22 Climatouch
™
CT0-7TC-32ADH
>> DE-HUMIDIFY SETPOINT: Allows you to reduce and maintain the relative humidity
at a specific setpoint.
>> Please note that this feature functions in the COOL Mode only. Your Climatouch
™
Thermostat must be configured to control a cooling unit such as an air conditioner
of heat pump. Once you choose De-Humidify follow these easy steps:
:: The DH SETPOINT with - and + icons allow you to lower and raise your setpoint
* Example of typical use of the De-Humidify function: In order to de-humidify you must
set the de-humidify setpoint below the current relative humidity. Your Climatouch
™
will
both lower and regulate temperature to the cooling setpoint while monitoring and
lowering the room humidity.
Since the De-Humidify feature uses the COOL Function of your Air Conditioner or
Heat Pump, your Climatouch
™
thermostat will turn off the air conditioning if either the
dehumidifier setpoint or temperature setpoint is reached - which ever comes first.
>> Climatouch
™
can operate the fan in one of the following three modes:
FAN AUTO: The fan runs only when there is a demand for
heating or cooling.
FAN ON: The fan runs continuously
FAN INTERMITTENT: The fan runs 10 minutes per 1/2 hour
providing a convenient way to improve air quality and save
energy.
When the fan is running, the animated fan icon will appear on
the HOME SCREEN.