Service manual

Residential Tranquility

27 Split (TTS) - 60Hz HFC-410A

Rev.: 8 May, 2014C

climatemaster.com

Water Coil Low Temperature Limit Setting

For all open loop systems the 30°F [-1.1°C] FP1 setting

(factory setting-water) should be used to avoid freeze damage

to the unit. See “Low Water Temperature Cutout Selection” in

this manual for details on the low limit setting.

Figure 8: Water Well Connections

Ground-Water Heat Pump Applications

Pressure

Ta n k

Shut-Off

Valve

Boiler

Drains

Flow

Regulator

Water In

Water Out

Water

Control

Va l v e

Optional

Filter

P/T Plugs

 CAUTION! 

CAUTION! Refrigerant pressure activated water regulating

valves should never be used with ClimateMaster

equipment.