Service manual

THE SMART SOLUTION FOR ENERGY EFFICIENCY

Vertical Stack

Rev.: 11/09/12

climatemaster.com

Figure 18

If you remove the valves to attach the hoses, be sure the

0-ring is in the valve before attaching to the union in the

cabinet.

Note: The valve union is to be hand tight plus a 1/4

turn.

Option to Step 2

Figure 20

Step 2: Attach Flex Hoses. Let the universal ends of the

hoses hang inside the cabinet for now. (Figure 22).

Note: Be sure the valve handles are in a position that

enables them to be opened and closed. Check the

swivel ends of the hoses (Figure 21). Gaskets must be

in the hose for proper seal.

Figure 22

Figure 21

Figure 19

 WARNING! 

WARNING! Do Not Remove Valve without ﬁ rst draining the

risers below cabinet level.