Specifications

ClimateMaster Water-Source Heating and Cooling Systems
CLIMATEMASTER WATER-SOURCE HEAT PUMPS
Tranquility Vertical Stack (TRM) Series
Rev.: 05/23/07D
TRM
26
Typical Unit - Exploded View
Single Unit: Furred In & Ducted
1 816/TRM cabinet (furred-in)
2 Slide-in heating and cooling chassis
3 Architectural acoustic R/A panel with hinged center door
4 Factory installed supply, return and condensate risers
5 Factory installed drain pan with P-trap assembly
6 Factory installed supply and return feeders with ball valves
7 Blower and motor assembly
8 Top discharge duct collar for fi eld supply air plenum
9 Conduit for control wiring
10 Conduit for line voltage wiring
11 Electr. & control compartment with (optional) disconnect
12 Factory installed base vibration dampening pad (optional)
13 Return air fi lter frame and fi lter
14 Chassis line voltage cord and plug assembly
15 Chassis supply and return water connections
16 Compressor acoustic enclosure
17 R/A panel fi ller & fi nishing frame (optional)
18 Condenser compartment
19 Typical drywall enclosure
20 Chassis slide rail assembly
21 AHH series hose kit (REQUIRED)
A
B
Optional Cabinet Stand
Model A B
09/15
8” [203mm] 17.1” [434mm]
20
8” [203mm] 20.1” [511mm]
24-36
8” [203mm] 24.1” [612mm]