Specifications

ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: 20 May, 2009BLC291 - 4
CCE Series 60Hz - R22 Submittal Data Eng/I-P
Geothermal Heat Pump Systems
THE CONSOLE (CCE) SERIES
The CCE series console unit provides a high effi ciency
WSHP “ductless” solution for spaces where individual,
quiet control of the heating and cooling system is
important. CCE units are especially ideal where ceiling
height and space are limited, or when preserving the
integrity of an existing structure. The CCE series
meets ASHRAE 90.1 effi ciencies, yet maintains small
cabinet dimensions.
Available in sizes 1/2 ton (1.76 kW) through 1-1/2 tons
(5.3 kW) with numerous cabinet, water piping and
control choices, the CCE series offers a wide range
of units for most any installation. The CCE has an
extended range refrigerant circuit, capable of ground
loop (geothermal) applications as well as water loop
(boiler-tower) applications. Standard features are many.
Microprocessor controls, galvanized steel cabinet,
polyester powder coat paint and TXV refrigerant
metering device are just some of the features of the
fl exible CCE series.
ClimateMaster’s exclusive double isolation compressor
mounting system makes the CCE series one of the
quietest console units on the market. Compressors are
mounted on vibration isolation springs to a heavy gauge
mounting plate, which is then isolated from the cabinet
base with rubber grommets for maximized vibration/
sound attenuation. Options such as e-coated air coil,
DDC controls, internal pump and factory-installed water
solenoid valves allow customized design solutions.
The CCE Series console water-source heat pumps
are designed to meet the challenges of today’s HVAC
demands with a low cost/high value “ductless” solution.
UNIT FEATURES
• Sizes 007 (1/2 ton, 1.76 kW) through 019 (1-1/2 ton,
5.3 kW)
• R22 Refrigerant
• Effi cient Rotary compressors
• Meets ASHRAE 90.1 effi ciencies
• Two-piece chassis/cabinet design
• Galvanized steel cabinet with durable Polar Ice powder
coat fi nish
• Slope top/aluminum rigid bar supply air grille
• Unique double isolation compressor mounting for
quiet operation
• TXV metering device
• Extended range (20 to 120°F, -6.7 to 48.9°C) operation
• ADA approved unit mounted controls, auto or manual-
change-over
• Remote-mounted controls available
• Microprocessor controls standard (optional DXM and/or
DDC controls)
• LonWorks, BACnet, Modbus and Johnson N2
compatibility options for DDC controls
• Factory-mounted hanger brackets for horizontal units
• Right or left-hand piping arrangement
• Front or bottom return
• Unit Performance Sentinel performance monitoring
system (remote controls)
• Eight Safeties Standard
• Wide variety of options including e-coated air coils
and internal pumps
New EarthPure® HFC-410A
console chassis available in
the new Tranquility Console
(TRC) Series.