Owner`s manual

８
Operation of wireless remote control
１．
２．
３．
４．
５．
６．
７．
８．
ACL
The general procedure:
The selected procedure:
Press SLEEP button, to set the sleep.
Note: When select the AUTO mode, the unit can choose the suitable running modes, automatically, and can obtain
the comfortable effect.
Press MODE, select the desirable running modes.
Press FAN button, set the fan speed.
When press SWING button, the guide louver will swing automatically,when repressed the button, it will stop.
When press Temp-UP/ Temp-DN the button, to set the desired temp.
Press T-OFF/T-ON button, then press H-UP/H-DN button, to set the schedule time of turning on or turning off.
The wireless remote control adopts two AAA alkaline dry cells.
Slide the cell cover downward to take out the worn cells, then change two new ones.( note to the correct polarity.)
Cover the cell cover.
NOTE:
Don't confuse the new and worn
or batteries of different types.
If the wireless remote control would
not be used for weeks, please take
out batteries to prevent liquid leakage
from damaging it.
When operating the wireless remote control,
it should be in its receiving range.
The wireless remote control should be
placed about 1m or more away from
the TV or any other electric appliances.
Cell cover
Insert two AAA batteries.
１．
２．
After powered on, there is a warning tone sound by buzzer, all patterns displayer of indoor unit displayed,
a few seconds later, all the display will automatically turned off, except the POWER/ RUN light,
The POWER/RUN running light turns red, the unit is await.( NOTE: Each time when power on or receive
the signals from the wireless remote control, the buzzer will sound)
Press ON/ OFF button on the wireless remote control, POWER/ RUN indicator turns green, and display
the running mode and setting temp. etc, the unit starts to run.(NOTE: if set the SLEEP function or turn off
the light button, all the displays will be turned off except the POWER/ RUN indicator.
Guide for operation procedure-Optional operation
Change the batteries