Instruction Manual

ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - [e-mail] - www.climarad.co.uk - tel. [phone]
Press 4 seconds simultaneously
Press for 6 seconds
Child lock. The child lock is activated.
Error. A fault has occurred. Please contact your installer or
housing corporation.
Dirty filter. Replace the air filters or contact your installer or
housing corporation After replacing the filters, press the + and -
buttons for 6 seconds.
Messages
Switch off
You can set the desired room temperature by turning the setting ring. Turn to the left for a
lower temperature, to the right for a higher temperature.
Operation ClimaRad Round room thermostat (optional)
Function Keys
Automatic adjustment. The ventilation/heating/cooling in the room is controlled
automatically by your ClimaRad ventilation unit, which functions on the basis of CO
2
measurement.
AUTO
Pause. Use this function when you temporarily do not wish to ventilate/heat/cool. After a
period of 4 hours your ClimaRad ventilation unit will switch back to automatic control.
Temperature. Using the + and - on your control panel, you can increase or decrease the
desired temperature of your room. If available, you can also adjust the room temperature
using your room thermostat.
Maximum. Your ClimaRad ventilation unit will function in the maximum setting. For
ventilation, this function can be used to expel unpleasant odours such as smoke or cooking
smells. After a period of 4 hours your ClimaRad switches back to automatic control.
Child lock. This button combination locks your control panel. Press the indicated buttons
simultaneously for 4 seconds. Repeat this action if you want to unlock the control panel.
Ventilation with cooler outside air. Your ClimaRad ventilation unit ventilates with outside
air when it is a minimum of 2 Degrees colder than the air in your room. After a period of 8
hours your ClimaRad switches back to automatic control. You can control the speed with
the + and -. For example, use this function in the summer when you want to lower the
temperature in your warmed room by several Degrees.
Function keys installer/property manager
Switch cooling function off/on: Only applicable for system with cooling system.
You switch it on or off by pressing the button for 4 sec.
Press 4. sec.