Instruction Manual
ONDERHOUD: luchtafvoerfilters
3
Cleaning the air outlet filters
Replacing the air outlet filters
Cleaning the air ducts
1
1
2
1
2
The air outlet filter is located at the bottom of the unit.
When visibly dirty, remove the dirt from the air outlet filter with a
vacuum cleaner. This guarantees the flow of air. You do not need to
remove the air outlet filter.
1. Remove the plug for the
ventilation unit and the plug for
the electrical radiator from the
sockets and pull the filter tray at
the bottom of the ClimaRad
2. Remove the 3 filters from the
tray.
3. Insert 3 new filters in the 3
sections of the tray and press
down firmly.
4. Slide the filter tray closed until
you hear a clicking sound. Push
the plug back into the socket.
Follow the steps 1 to 4 under
'Replacing the air supply filters'.
5. Turn both blue caps once
against the direction of the clock
and remove them.
6. Remove any dirt from both
channels with a vacuum cleaner or
a soft cloth (do not use water).
9. Unlock the radiator and tilt it
back. Push the plug back into the
sockets and tighten the retaining
screws.
7. Push both blue filter caps fully
back in for a correct operation
and tighten.
8. Close the covers on the left-
hand and right-hand side of the
unit, and slide both latching slides
outwards.
ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - info@climarad.com - www.climarad.co.uk - tel. +31 541 358130
left
right
left
right