Specifications

MT-01 Indice 0 Page 44
RESISTANCE TEST MENU
CAVE A VIN (WINE
CABINET)
Temp. Int. (internal
temperature) 12°C
Device's main display. To enter the configuration menu, simultaneously press the
two buttons ( ). Two audible sounds (beep) will acknowledge your choice.
- Configurations -
Réfrigération
(refrigeration settings)
This option is used to select the value below which the compressor will be activated
FROID ON (COOLING ON). To select the settings menu, press the top arrow ( ) to
browse through the menu and select "Configurations menu technique"
(configuration of the settings menu).
- CONFIGURATION -
MENU TECHNIQUE
(CONFIGURATION OF THE
SETTINGS MENU)
To enter this menu simultaneously press both of the buttons until you hear two
audible sounds
< TECHNIQUE >
Offset temp (offset
temperature setting)
On this screen press the ( ) arrow until "test résistance" (resistance test) is
displayed.
< TECHNIQUE >
Test resistance
(resistance test setting)
Once this menu is selected, acknowledge by simultaneously pressing both of the
buttons until you hear two audible sounds.
[HAUT = ON] [Bas =
OFF] (UP = ON; DOWN
= OFF)
Test resistance
(resistance test setting)
Press the arrow to activate the start-up of the resistance.
Press the arrow to activate the shut-down of the resistance.
EXIT [OFF]
Resistance [OFF]
To exit the menu simultaneously press both of the buttons until you hear two
audible sounds
TECHNIQUE
Test resistance
(resistance test setting)
On this screen press the ( ) arrow until "technique exit" (exit settings) is displayed.
TECHNIQUE
Exit
On this screen, simultaneously press both of the buttons until you hear two audible
sounds
CONFIGURATION -
MENU TECHNIQUE
(CONFIGURATION OF THE
SETTINGS MENU)
On this screen press the ( ) arrow until "configurations exit" (exit configuration) is
displayed.