Specifications

MT-01 Indice 0 Page 12
Cool the sensor down again. Wait a few minutes, then place your hand on heating device located at
the back of the evaporator, on the lower part, for Hungarian models. On Portuguese models, you
must place your hand on the step above the compressor, inside the cabinet.
If heat is coming out, the system is working. If this is not the case, check the power supply to the
element, thermostat and/or replace if necessary (only to be completed by specialist technicians).
6. How should I transport my cabinet?
The cabinet must be transported as much as possible while being packed,
in order to prevent any damages.
If you need to transport the wine cabinet laying on its side, protect it well
and always place it on the side so that the compressor's
tail load is facing upwards.
7. I have not loaded as many bottles as the full capacity!
Our calculations are based on a standard bottle namely the most common: traditional 75 cl
Bordeaux. However, due to the variety and the number of differently shaped bottles, you might be
able to load less than the recommended amount (i.e. Bourgogne = approx. -30% compared to a
Bordeaux).