Operation Manual

24
Caution! Cleaning and servicing
• Before carrying out servicing, switch off the power supply and disconnect
the appliance.
• When cleaning the appliance, do not use metal objects, steam systems,
volatile fluids, organic solvents or abrasive substances.
• Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
• To ensure proper electrical connection, follow the recommendations given
in the present manual.
• Unpack the appliance and visually check that it is not damaged. Do not
connect a damaged appliance. Inform your retailer or point of sale of any
damage. In such a case, keep the packaging.
• It is recommended that the appliance be allowed to settle for at least
4 hours before connecting the electrical power supply, so that the
compressor fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To ensure
sufficient ventilation, observe the installation recommendations provided.
• In order to avoid fire risk, wherever possible, ensure that the appliance is
not in contact with walls or with any hot element (compressor, condenser).
Observe the installation recommendations.
• The appliance should not be placed close to radiators or cooking hot plates
or gas rings.
• Check that electrical sockets remain accessible when the appliance is
installed.
POWER SAVING
To limit the electricity consumption of your appliance:
• Install it in an appropriate place (see “Installing your appliance”).
• Leave the doors open as little time as possible.
•To ensure that the appliance operates properly, clean the condenser
regularly (see “Routine servicing of your appliance”).