Manual

7
www.climacoolcorp.com
Rigging and Lifting Procedures
Rigging
Each module should be lifted using lift straps threaded through the steel base cutouts and a spreader bar.
Note: If no spreader bar is used, damage to the module may occur.
Figure 1 Figure 2
Figure 3
Lifting StrapLifting Strap
Spreader Bar Spreader Bar
Spreader Bar
Lifting and Transporting Modules
Pallet jacks or forklifts are required for lifting and transporting the module. Each module has base cutouts provided
for ease of maneuverability. 60” forks are recommended to prevent damage to chiller base.