Owner manual
Options for every application.
Water Isolation Valves and Flush Ports
Factory installed to provide isolation to the module
for maintenance and cleaning of evaporator and
condenser heat exchangers. This is accomplished
without increasing unit or bank dimensions while
Optional choice of integral manual or motorized
Condenser Water Head Pressure
Regulating Control Factory installed
motorized condenser water valves provide head
pressure regulation for low entering condenser
Hot Gas Bypass Factory installed on both
circuits allowing unit operation below the minimum
step of unloading.
Heat Recovery Factory installed option
simultaneously producing chilled water for the
chiller system.
Heat Pump Factory installed reverse cycle
heating and cooling operation compatible with
boiler/tower and geothermal systems.
Water Header Bypass
water header bypass may be utilized to prevent
deadheading the pump.
Pressure Dierential Flow Sensor Field
installed to prevent operation of the chiller without
condenser.
Automatic CS Series Strainer Package
systems with minimum 60 mesh stainless steel
screens. Available options include pressure
Manual Strainers Field installed to increase
Y-style and Basket strainers of cast iron 200 psi or
carbon 275 psi with 60 mesh stainless steel screens.
bank for ease of service.
LEED categories satised by the
UCW/H system:
Sustainable Sites and Building Re-Use
Compact design shrinks mechanical room and
through existing doors. This eliminates the need for
demolition and reconstruction.
Enhanced Commissioning and
CoolLogic
BAS interface.
Optimized Energy Performance Exceeds
Enhanced Refrigerant Management Micro
charge of chlorine-free and non-ozone depleting
refrigerant.
Thermal Comfort Precise required heating and
cooling ensures the highest comfort for building
occupants.