User Manual

www.climacoolcorp.com
28
Project Name: Software Version:
General System Settings FN 2 COOLING PID FN 8
Chiller Control Type PID Interval
Control Source Use Pre-calc PID values Below?
Enable from Keypad Stage One Cool PID P-Gain
Chiller Model Type Stage One Cool PID I-Gain
HEAT & COOL SETPOINT MENUS Clg PID Rise
Cool Setpoint Clg PID Fall
Cool setpoint offset
Heat Setpoint Or Manually Select PID Values Below
Heat setpoint offset Stage One Cool PID P-Gain
INPUTS 6 & 10 REM SETPT SETUP Stage One Cool PID I-Gain #1
Input Chn #10 Type Clg PID Rise
Min Heat Wat Out Setpt Clg PID Fall
Max Heat Wat Out Setpt
Input Chn #10 Scaling Max Cool Ramp Rate
Input Chn #6 Type Use Max Possible Compressors
Min Cool Wat Out Setpt Cool Max PID Limit w/MVlv
Max Cool Wat Out Setpt Max PID of Last Stg w/MVlv
Input Chn #6 Scaling Cool DB 1
LEAD COMP ROTATION SETUP Cool DB 2
Lead Comp rotation method Stage one Cool PID I-Gain #2
Rotate Compr Lead on Run Hours PID Switching Differential
Use Max Possible Compressors Cool Cnt Setpoint Offset
Use Max Available Compressors Module Min CDMV ADJ
Refresh Runtime Hours
Stage Up Safety Index
HEATING PID FN 8
Stage Down Safety Index PID Interval
Use Pre-calc PID values Below?
Refrig Temp & Press Alarm Settings
FN6
Stage One Heat PID P-Gain
If PRV instd adjust Dis Pr Alarm Manual < PRV Trip Stage One Heat PID I-Gain
Discharge Pressure Alarm Setpoint Htg PID Rise
High Discharge Temperature Alarm Htg PID Fall
Mod extra Low suction pressure Alarm
Mod Suction Press Time Delay before Alarm Or Manually Select PID Values Below
Heat Low Suction Temp Alarm PID P-Gain
Cool Low Suction Temp Alarm PID I-Gain #1
Heat Low Suction Pressure Alarm Htg PID Rise
Cool Low Suction Pressure Alarm Htg PID Fall
LOW SUC SPRHT & LOW DIS SPRHT SETPTS
Mod Low Dis Superheat Max Heat Ramp Rate
Mod Low Suc Superheat Heat Max PID Limit w/MVlv
Mod High Suc Superheat Max PID of Last Stage w/MVlv
Use High Superheat Cutout? PID Switching Differential
COMP MIN & MAX RUN TIMES Heat Cnt Setpoint Offset
Compr Minimum Run Time Heat DB 1
Compr Minimum Off Time Heat DB 2
Stage one Heat PID I-Gain #2