User Manual

27
www.climacoolcorp.com
Page
Project Name: Contractor Name:
Address: Address:
City/State City/State
Start-up Date: Phone No.:
Model No.: Model No.:
Serial No.: Serial No. 1:
Chiller No.: Serial No. 2:
Evaporator: /
∆ P Evaporator: Yes N/A
Condenser: /
∆ P Condenser: Yes N/A
Evaporator & Condenser "flow devices" shut of chiller below approx 25% loss of flow: Yes
► All wiring terminations in module panel, safeties and compressors tightened: Yes No
Yes No
L1 L2 L3 L1/L2 L2/L3 L1/L3
Amperage: L1 L2 L3 Amperage: L1 L2 L3
Sight Glass Oil Level: Sight Glass Oil Level:
Suction Pressure: Suction Pressure:
Suction Temperature: Suction Temperature:
Compressor Superheat: Compressor Superheat:
Discharge Pressure:
Discharge Pressure:
Liquid Line Temperature: Liquid Line Temperature:
Liquid Subcooling: Liquid Subcooling:
Evaporator Leaving Water Temp.: Evaporator Leaving Water Temp.:
Condenser Entering Water Temp.: Condenser Entering Water Temp.:
Condenser Leaving Water Temp.: Condenser Leaving Water Temp.:
Evaporator Pressure Differential:
Condenser Pressure Differential:
► Verify Safety Setting Limits: ► Verify Safety Setting Limits:
Low Temp: Low Temp:
Rep Signature: Print Name:
E-Signature:
For initial MANDATORY water samples, bottles are provided.
Follow instructions on label and mail the same day sample is taken.
Startup and Warranty Registration Form (Water-Cooled)
1 of 3
(Authorized Signature)
High Pressure:
Compressor Circuit #2
Compressor:
Module:
Ambient
Temp:
Sign, date and E-mail to: [e-mail] or Fax
to: [phone] Attn: Customer Service
Evaporator Entering Water Temp.:
Low Pressure:
High Pressure:
Low Pressure:
Bank No.:
Low Voltage (24V):
Bank Water Pressures Entering/Leaving
Evaporator Entering Water Temp.:
Water Samples Taken: (Mark "X")
Phase / Phase
Compressor Circuit # 1
Voltage / Ground
► Rotation of scroll compressor is correct
Check Box
Doc#: WaterCooledStartup_11.02.2012