USER MANUAL Portable Air Conditioner and Heater With Heat Pump Technology PAC15H & PAC18H 15,000btu Cool & Heat Portable Air Conditioner 18,000btu Cool & Heat Portable Air Conditioner Please read this manual carefully prior to operating the product Please keep ALL packaging for duration of Warranty Period 1/11
TABLE OF CONTENTS IMPORTANT SAFEGUARDS 2 INTRODUCTION / WARRANTY 3 PRODUCT DIAGRAM 4-5 INSTALLATION 6-7 OPERATION 8 WATER DRAINAGE 9 MAINTENANCE/CLEANING 10 TROUBLESHOOTING 11 TECHNICAL SUPPORT / CUSTOMER SERVICE CONTACT 11 IMPORTANT SAFEGUARDS Before installing and using your portable air conditioner and heater, it is important that you read this owner’s manual carefully. Store this manual in a safe place for future reference.
INTRODUCTION Thank you for purchasing this Portable Air Conditioner and Heater. This unit is designed to improve indoor living and working comfort by providing cooling, dehumidifying, and heating with minimal installation. Please complete the following information for future reference. Retain this owner’s manual with your sales receipt as a permanent record of your purchase.
PRODUCT DIAGRAM ACCESSORIES ITEM DESCRIPTION QTY EXHAUST HOSE 1 HOSE FUNNELL ATTACHMENT 1 HOSE CONNECTOR TO UNIT 1 SLIDING WINDOW KIT 1 MANUAL 1 REMOTE CONTROL 1 BATTERY 1 DRAIN HOSE 1 After unpacking, please ensure the above listed accessories are included.
CONTROL PANEL AND DISPLAY Button Function Power Temp Up Temp Down Mode Speed Timer Full Lamp Turns the unit on/off Increases set temperature Decreases set temperature Changes the mode Changes the fan speed Sets timer Indicates water full LED WINDOW DISPLAY 1) 2) 3) 4) 5) 6) 7) 8) Auto Mode Icon Fan Speed Cooling Mode Icon Temperature & Timer Setting Timer On Temperature Dry Mode Icon Heat Mode Icon REMOTE CONTROL FUNCTIONS 5/11 ℃
INSTALLATION Exhausting the Air It is necessary to use the exhaust hose when using the machine.
Window Kit Installation The window kit is designed to fit into most standard vertical and horizontal windows. However, it may be necessary to modify some aspects of the installation process for certain window types. 1. Open the window or sliding door and adjust the length of the window kit to fit the opening. Mark and cut down a single panel of the window kit if necessary. 2. Place the window kit between the window and the window frame as shown in the images to the right.
OPERATION Before Use • • • • • Check that the Exhaust Hose has been mounted properly (see ‘Installation’ section).
WATER DRAINAGE When the unit is in cooling mode, unwanted water is extracted from the air. Most of this water is re-used to cool the unit and make it run more efficiently. When the unit is used in extremely humid environments, water will collect in a water container at the bottom of the unit. When the water container is full, the compressor will stop but the fan will continue to run.
MAINTENANCE & CLEANING 1) Before cleaning, be sure to disconnect the unit from any electric supply outlet; 2) Do not use gasoline or other chemicals to clean the unit; 3) Do not wash the unit directly; 4) If the conditioner is damaged, please contact the dealer or repair shop. Cleaning Air Filter If the air filter becomes clogged with dust/dirt the unit will not function properly, the air filter should be cleaned once every two weeks. • • • • Open the air inlet grille and take off air filter.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE REMEDY Is the unit plugged in? Securely plug the power cord into the wall outlet. Is the main power supply on? Re-establish the main power supply. Is the water container full indicator light on? Empty the water container. Is the timer set? Change timer settings. Is the air inlet or outlet blocked? Clear the blocking. Is there any other heat source in the room? Move the heat source. Are the air filters dirty? Clean the air filters.
