Instructions / Assembly
Digital Display
NOTE: The remote control is intended only for the functional
operation of the product, It can not lock/unlock the heating function!
POWER
The POWER button turns the appliance on or off. It has a memory function; the button
turns off all functions at once but retains the settings in the memory. By pressing the button
again, the unit will turn on at the same settings. If the TIMER has set & time has expired all
functions will stop. Press the POWER button start the appliance.
FLAME
The FLAME control switch manages the flame brightness. There are 4 brightness levels
and an off position. Each time the FLAME button is pressed, the intensity of the flame
decrease. When adjusting the FLAME button, a number indicating the brightness of flame
will be visible on the digital display.After turning on digital display, if nothing happens within
10 seconds, digital display will turn off.
4
OPERATING INSTRUCTION
On the top-right of the electric firebox is the touchscreen control panel. This panel contains
the buttons to properly operate the electric fireplace. the buttons on the remote control
function in the same way. The remote control has an effective range of up to 6 m.
HEATER
The HEATER button turns the heater on and off.
When in ON position, press and hold the HEATER button 5 seconds and enter temperature
adjustment mode(Note: This can't be set with the remote control). In the adjustment
mode, the digital display will flash at 0.5 second intervals. There are 11 temperature
settings:72℉-74℉-76℉-78℉-80℉-82℉-ON-64℉---72℉(22℃-23℃-24℃-25℃-26℃-
27℃-ON-18℃---22℃)
After the temperature is selected the digital display will flash 5 times and exit from setting
status.After turning on the digital temperature display, if nothing happen within 10 seconds,
the digital display will expire.
Temperature unit convert function: With the heater is ON the position, press and hold the
power icon for 5 seconds, current temperature unit display will flash 3 timers and convert
to another temperature unit (Note: This can't be set with the remote control).
Pantalla Digital
NOTA: El control remoto está diseñado únicamente para la
operación funcional del producto, no se puede bloquear /
desbloquear la función de calentamiento.
POWER
El botón de POWER enciende o apaga el aparato. Tiene una función de memoria; el botón
apaga todas las funciones a la vez, pero conserva la configuración en la memoria. Pulsando
el botón de nuevo, la unidad se enciende en la misma configuración. Una vez que el
TEMPORIZADOR se ha seleccionado y el tiempo se ha acabado, todas las funciones se
cerrarán. Pulse el botón de POWER para iniciar el aparato.
LLAME
El interruptor de LLAMA arregla el brillo de las llamas. Hay 4 formas de ajustar la intencidad
y una posición de apagado. Cada vez que el botón de LLAMA se pulsa, la intensidad de las
llamas disminuye. Cuando ajuste el botón de LLAMA, un numero que indica el brillo de las
llamas aparece en la pantalla digital. Después de prender la pantalla digital, si no pasa nada
dentro de 10 segundos, la pantalla digital va a apagar.
11
INSTRUCCIONES DE OPERACIÓN
En la parte superior derecha de la caja de fuego eléctrico hay un panel de control de pantalla
táctil,Este panel contiene los botones para operar adecuadamente la chimenea eléctrica. Los
botones del panel de control y la función de control remoto de la misma manera. El mando a
distancia tiene un alcance efectivo de hasta 6 metros.
CALEFACTOR
El botón de CALEFACTOR enciende o apaga el calefactor.
Cuando en la posición ON, pulse y mantenga pulsado el botón de CALEFACTOR por 5
segundos para entrar en el modo de ajuste de la temperatura(Nota: esto no se puede
ajustar con el mando a distancia). En el modo de ajuste, la pantalla digital destellará en
0.5 segundos intervalos. Hay 11 ajustes de temperatura: 72℉-74℉-76℉-78℉-80℉-82℉-
ON-64℉---72℉(22℃-23℃-24℃-25℃-26℃-27℃-ON-18℃---22℃).
Después de que la temperatura ha sido seleccionado, la pantalla digital se destellará 5
veces y se saldrá del modo. Después de encender la pantalla digital de temperatura, si
nada pasara dentro de 10 segundos, la pantalla digital se apagará.