Installation Guide

4.1 MAIN POWER BUTTON
4.2 CONTROL PANEL/REMOTE CONTROL OPERATION
The Main Power Button is local on the upper right of the fireplace
as appliance, press indicator to turn on the appliance, and press
the other side to turn it off.
Note: Make sure the Main Power Switch is turned on before
operating.
Once the appliance has been plugged into a grounded electrical
outlet, it is ready to operate.
(Main Power Switch must be turned ON before using the remote
control.) The touch display panel is shown on the bottom right of
the front of the appliance.
Move the battery's transparent insulating piece away before
using the remote control
4.0 OPERATING INSTRUCTIONS
MAIN POWER BUTTON
Power ON/OFF
Flame Increase Button
Heater Power
Heater I Button
Heater II Button
Flame Power Switch
Flame Decrease Button
Heater I
Heater II
Flame Increase
Power
ON/OFF
Flame Decrease
Heater Power
13 14