Installation Guide

1.Lift fireplace and put it onto the bracket,then lock the pre 4 silver screws on the top(Step 4).
2.Take off the 2 silver screws on the left side and right side.Use a suction cup to hold the glass surface,
first take out the glass upwards and then outwards, and find a place to put the glass(Step 5).
3.Put the plastic tray,and put on the crystal and wood fire logs,then lift the glass panel onto the fireplace by 2 screws(Step 6).
1.Take off the 4 silver screws on the top and then take off the wall bracket from the fireplace(See Step 1).
2.Take off the 2 silver screws on the left side and right side.Use a suction cup to hold the glass surface,
first take out the glass upwards and then outwards, and find a place to put the glass(See Step 2).
Put the fireplace into the hole,then fix the 2 silver screws as the photo from the inside of the fireplace(See Step 3).
Before installing the in-wall fireplace,please read the following steps carefully.
Remove the four silver colored screws on the top,and take off the wall bracket(See Step 1),Use the screw driver
to drill the wall(See Step 2),Use hammer to put the screws into the wall together with the wall bracket(See Step 3).
Step 2
Wall
Wall
Step 3
WALL MOUNTED FIREPLACE STYLE
RECESSED FIREPLACE STYLE
Step 2
Step 3
Put the plastic tray,and put on the crystal and drift wood fire logs(See Step 4).
Step 4
Step1
Please use the suction cup
to fix the glass before taking it.
Take off
the right
silver
screw
Take off
the left
silver
screw
Step1
Please use the suction cup
to fix the glass before taking it.
Take off
the right
silver
screw
Take off
the left
silver
screw
Step 4
Step 5
Step 6