World-Class Auto Security TM TM TM Owner's Manual
Standard Features ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford Electronics will repair or replace the control unit free of charge. ✔ A Pair of VirtualKeys™ — These ingenious proximity keys that are attached to your car keys communicate through the airwaves with the engine immobilization system even before you insert your car key into the ignition switch. These keys are truly virtual since they are completely “user-transparent.
Standard Features (cont.) ✔ MultiKey™ Recognition — The VirtualKey AutoImmobilizer accepts up to 30 different VirtualKeys. — If you have more than one car, you can use any of the VirtualKeys to control any or all of your other vehicles, even if each vehicle has an entirely different ignition key. ✔ MultiCar Protection ✔ AutoArming™— The system arms itself automatically (passively) sixty seconds after you remove your key from the ignition switch.
Operation of your VirtualKey AutoImmobilizer Proper Attachment of the VirtualKey to the Ignition Key The VirtualKey MUST BE ATTACHED DIRECTLY to the vehicle’s ignition key and NOT to a keychain. The reason is that the VirtualKey code must be electronically read through the airwaves by the AutoImmobilizer’s antenna, which is located near your vehicle’s ignition switch.
Adding New VirtualKeys Your VirtualKey AutoImmobilizer will accept as many as 30 different VirtualKeys. To add additional VirtualKeys to your system, do the following: 1. Remove the VirtualKey from your ignition key. 2. Open a door and leave it open. 3. Turn the ignition switch to the “ON” position. 4. Immediately bring the VirtualKey you removed within an inch of the ignition switch. The LED will turn off (system is disarmed). As soon as the LED turns off, move the VirtualKey away.
© Copyright Clifford Electronics, Inc.
World-Class Auto Security TM TM TM Installation Manual
