Color profile: Disabled Composite Default screen Welcome to the world of high-technology vehicle security and convenience Your Clifford Electronics Prime Level THREE security upgrade package adds extensive security features to the keyless entry functions of your vehicles factory remote. TO ARM SECURITY: Lock the doors with your factory remote control.* The LED inside the car will flash repeatedly to confirm that the starter motor is electronically immobilized and the doors will be monitored.
Color profile: Disabled Composite Default screen Starter AutoImmobilization While armed, the starter motor is electronically immobilized. An optional triple-point upgrade is available to additionally immobilize the ignition system and fuel pump for enhanced security.
Color profile: Disabled Composite Default screen Smart AutoTesting™ If a door is ajar when you remotely arm, youll hear the usual 2 beeps (if so wired), then, 5 seconds later, 4 more beeps (this warning is not possible on vehicles that have delayed or dimming courtesy lights). Valet Mode Valet mode lets you override all security features if your factory remote fails or needs a new battery. Coded valet mode via the valet switch NOTE: If you lose the use of your remote (lost; dead battery; etc.
Color profile: Disabled Composite Default screen To enable valet mode 1. Turn the ignition on or start the engine (you may also do this while the engine is running). 2. Enter your valet code (factory-set valet code is 2: left, left, right) on the switch mounted behind the LED assembly. 3. Continue holding the switch to the right for 5 seconds, then release. The LED will stay on for ongoing visual confirmation of valet mode. To exit valet mode and restore normal operation 1.
