User Guide

Summary Table of User-Selectable Features
Feature
Factory
setting
# of flicks
and chirps
Supplemental
action
Completion
confirmation Result
AutoArming
ON 4 —
1 chirp 3 seconds
after last step
Change state from
ON to OFF or vice-versa
AutoArm & Lock
OFF 5 —
1 chirp 3 seconds
after last step
Change state from
OFF to ON or vice-versa
Arm/Disarm Chirp Confirmations
ON 6 —
1 chirp 3 seconds
after last step
Change state from
ON to OFF or vice-versa
AutoLock & AutoUnLock
ON 9 —
1 chirp 3 seconds
after last step
Change state from
ON to OFF or vice-versa
Siren Duration
30 sec. 10 —
1 chirp 3 seconds
after last step
Change duration from 30
to 60 seconds or vice-versa
Tampering Warning
OFF 11 —
1 chirp 3 seconds
after last step
Change state from
OFF to ON or vice-versa
FACT — False Alarm Control and Test
ON 12 —
1 chirp 3 seconds
after last step
Change state from
ON to OFF or vice-versa
Add a New Remote — Channel 1 (arm/disarm)
— 13
Press remote
control button I
1 chirp
Button I code of
new remote control
has been memorized
Add a New Remote — Channel 2 (accessory)
— 14
Press remote
control button
II
2 chirps
Button II code of
new remote control
has been memorized
Add a New Remote — Channel 3 (si- lent arm/dis-
arm)
— 15
Simultaneously
press remote
control buttons
I+II *
3 chirps
Button I+II* code of
new remote control
has been memorized
*NOTE: If using an optional 4-button remote control, you may, if you wish, assign either button III or IV to this function.