User Guide

panic mode

If you are threatened in or near your vehicle, you can attract atten-

tion by triggering the system with your remote! Just press

for 1.5 seconds, and you will enter Panic Mode. The siren will

sound and the parking lights will flash for the programmed siren

duration. To stop Panic Mode at any time, press again.

valet mode

You can prevent your security system from automatically arming

and triggering by using Valet Mode. This is very useful when

washing the vehicle or having it serviced. In Valet Mode, the

security system will not arm, even with the remote transmitter,

but all convenience functions (door locks, trunk release, etc.)

will continue to work normally.

To enter or exit Valet Mode:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet

switch within 10 seconds.

DRW-35

➜

note: The Warning Zone response to lighter impacts is

bypassed if the system is armed using Remote Controlled

Chirp Muting. This ensures that no chirps will be emit-

ted by the siren in an area you want chirp-free. The sys-

tem is still fully capable of triggering. Only the Warning

Zone response is bypassed.