WORLD-CLASS AUTO SECURITY Owner's Manual TM
Table of Contents Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Optional Remote Keyless Entry System Plus Package Features . . . . . 3 How to Operate Your Remote Keyless Entry System System . . . . . . . 4 Your 3-Button/3-Channel Remote Controls . . . . . . . . . . . . . . . . 4 AutoLock and AutoUnLock . . . . . . . . . . . . . . . . . . . . . . . . . 5 Remote Trunk Release . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Remote Headlight Activation . .
Standard Features of the Remote Keyless Entry System ✔ Lifetime Warranty — This is one feature you may never use since Clifford systems are renowned for their reliability. For as long as you own the vehicle, Clifford Electronics will repair or replace the control unit and remotes free of charge. ✔ A Pair of 3-Button/3-Channel Remote Controls — These user-friendly keychain remote controls give you fingertip command of all convenience features from a typical range of 100 feet.
Optional Remote Keyless Entry System Plus Package Tailor the Remote Keyless Entry System system to fit your needs with the Remote Keyless Entry System Plus.
How to Operate Your Remote Keyless Entry System System Congratulations on your purchase of Clifford Electronics’ Remote Keyless Entry System. The Remote Keyless Entry System surpasses all other keyless entry systems with its ease-of-use and unique security and lifestyle convenience features. After reading the simple instructions that follow, you’ll enjoy the use of a whole new level of security and convenience features.
HOW TO REMOTELY COMMAND OPTIONAL ACCESSORIES.... Button 2 on the remote control may be used to command any of the accessories you’ve added to your system. Button 2 can control two separate accessories: one when the doors are locked (for example, an optional remote controlled engine starter); and another when the doors are unlocked (such as a remote controlled trunk release). In addition, button 3 can remotely command yet another accessory, regardless of the door lock status.
The Optional Remote Keyless Entry System PLUS If your Remote Keyless Entry System has been equipped with the Plus option package, your system has even greater functionality (your local Authorized Clifford Dealer can add the Plus option to your Remote Keyless Entry System anytime). The package includes our patent-pending PlainView™ Coded Valet Switch that allows you to easily expand and customize the features of your Remote Keyless Entry System system.
How to Set Your Own Secret Valet Code Since all Remote Keyless Entry System systems have the same factory-set valet code (the single digit “2") it’s highly advisable to set your own secret valet code. To do this, perform the following steps: 1. Select your code. It may be a single-, double- or triple-digit code number, each digit being any number between 1-9. Be sure to select a code that’s easy to remember. 2.
PlainView Coded Valet Switch LED Indicator The LED status indicator in the switch is used to communicate the operational status of your Remote Keyless Entry System system: LED Condition Meaning Off Doors are unlocked, you may enter the vehicle. On System in valet or programming mode. One Flash Confirms successful programming of a system feature. Two Flashes Confirms successful programming of a remote control button. Flashing Doors are locked and system is protecting your vehicle.
Programming the Remote Controlled Headlights “ON” Duration: If your system has remote controlled headlights, you can select the length of time the headlights remain on when remotely activated. You can set the duration to any time interval between one second and two minutes (the timer circuit is factory preset to 15 seconds). To change the timer setting, perform the following procedure: 1. Enter the vehicle, insert your car key and turn the ignition switch to the “ON” position. 2. Enter your secret code.
Programming User-Selectable Features Your Remote Keyless Entry System Plus package allows you to set many of its features to your personal preferences. We have made the programming procedures very simple: to make a change, you just press the PlainView switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below. To change any of these settings (turn them “OFF” to “ON,” or vice-versa), just repeat the procedure: 1.
Feature # of Factory momentary setting presses Secondary action Program completion confirmation Result 2 LED Flashes Button 2/channel 2 code of the new remote control has been memorized Add a New Remote to Channel 2 (optional remote accessory) — 9 Press remote control button 2 within 10 seconds. Add a New Remote to Channel 3 (optional remote accessory) — 10 Press remote control button 3 within 10 seconds.
