Datasheet

SPECIFICATIONS
CUSTOMER MODEL NO. / TITLE
OPTICAL RECEIVING JACK
RCA
1. Scope
This specification covers the requirements for “PIN JACK”.
2. Rated
A) Rated voltage DC/AC 34V
B) Rated current DC/AC 2A
C) Temperature range -25~70℃
D) Humidity range 85% RH MAX.
E) Test condition
Unless otherwise specified herein, all measurements and tests shall be made at temperature of
5℃~35℃ and relative humidity of 45%~85%.
3. Electrical efficiency
Item
3A) Dielectric
strength
(500V DC applied between mutual insulated metal
parts.)
Initial
3B) Insulation
resistance
≧ 50 MΩ
3C) Contact
resistance
W
R
T
N
CLIFF ELECTRONIC COMPONENTS LTD
500V AC applied between mutual insulated metal
parts for one minute.
After heat test
After cold test
After resistance to soldering test
After life test
After temperature cycling test
After humidity test
(Measure at a current of less than 100mA 1KHz.
The Gauge plug used shall be cleaned and free from
oxidation film of the surface.)
Initial
After humidity test
After heat test
After cold test
After resistance to soldering test
After life test
After temperature cycling test
A
P
V
D
Condition
SPECIFICATION NO.
FC684206R
C
H
K
D
Not breaking insulation
≧ 100 MΩ
C
H
K
D
PAGE： 8 OF 11
DATE： OCT.28.2003
Result/Value
≦ 30 mΩ
REV. NAME DATE REMARK