Datasheet

For further information, contact [e-mail]
K9
K10
K11
K12
K13
K87MB
2 colour moulded. 8 standard colours. Push
fitting only.
K87MB - hard finish version.
K87MBR - Rubber (Soft touch) finish.
Base Diameter: 16.8
Overall height: 14.5
Shaft depth: 12.8 (11.8 on 6mm SPL)
K87MA, K87MAR
2 colour moulded. 8 standard colours. Push
fitting only. Integral cap, not removeable.
K87MA - Hard finish version.
K87MAR - Rubber (Soft touch) finish
Base Diameter: 16.8
Overall height: 14.5
Shaft depth: 12.8 (11.8 on 6mm SPL)
Has a skirt / nut
cover. 8 cap colours,
ordered separately.
Base Diameter: 19.2
Overall height: 19
Shaft depth: 13.8
Without skirt. Cap is
same as K9
Base Diameter: 17
Overall height: 18.5
Shaft depth: 13
Push in cap, 8 colours,
ordered separately.
Base Diameter: 19.5
Overall height: 19
Shaft depth: 13.3
Collet type 7.2
Push in cap, 8
colours or skirt as K6
(glued on).
Base Diameter: 25.3
Overall height: 19.2
Shaft depth: 13.3
Collet type 7.2
A range of knobs incorporate metal threads or threaded studs.
Sizes range from M4 to M8. Threaded element is either brass (M4)
or steel (M5 to M8). Knobs can be supplied unassembled.
Due to the large number of possible variations, these knobs are
made to order only. Standard colours are grey, black or red
.
All dimensions are approximate and in mm.
Note: 2 colour moulded knobs may be subject to minimum production run quantities.
K86R
2 colour moulded.
6 standard colours.
Soft touch finish.
Base Diameter: 16.0
Overall height: 15.0
Shaft depth: 12
K86AR
2 colour moulded.
6 standard colours.
Soft touch finish.
Base Diameter: 11.0
Overall height: 14.8
Shaft depth: 10