Datasheet

K85
K85M, K85MS
K87MA, K87MAR
K87MB, K87MBR
Available for push fitting only. 8 colours of cap
are available. Caps push into the top of the
knob, and can locate in any position. Skirt or
cap or both may have a marker line. Supplied
unassembled. Not available in rubber finish.
Knobs packed 250 knobs / bag.
Caps packed 100 or 1000 / bag.
K85M - Available for push fit only. Two colour
moulded. Body and line / cap can be 8
contrasting colours. Suitable for applications
where quantities used demand very low cost.
Not available with rubber finish.
K85MS - (Under devt). Similar to K85M, but
without skirt. Rubber finish is available.
Packed 250 or 1000 / bag
K87MB - Available for push fitting only. Hard finish
version.
K87MBR - Is rubber finish (Soft Touch).
These knobs are similar to K87MA and MAR but
without a coloured top. Used where colour coding
is required to be more subtle. (marker line).
Packed 250 or 1000 / bag.
Standard Top / Line
Colours
BLACK, WHITE, GREY, BLUE,
GREEN, RED, ORANGE, YELLOW
Standard Line Colours.
Same as K87MA
All knobs on this page have complimentary design.
See Page 8 for Shaft Options available.
Dimensions in mm.
K87MA - Available for push fitting only. Hard finish
version.
K87MAR - Is rubber finish (Soft Touch).
These are 2 colour moulded. We have 8 standard
colours, and make custom versions subject to
acceptable quantities. Knobs are low cost due to
volume production. The coloured top helps identify
colour coded grouped functions in equipment with
many knobs.
Packed 250 or 1000 / bag.
3.