Datasheet

Specification: Withstand voltage: 2000V DC Min.
Maximum Current: 5 amps
Temperature Rating: -10° C to +70° C
Life (Minimum): 10,000+ Operations
Nominal Contact Resistance: <50mΩ
Technical Data:
Designed to receive both mono and stereo
1
/4" jack plugs, the S2 socket is produced from grade 1 black nylon and
is supplied with a black nylon hexagonal mounting nut (standard) or optional nickel plated brass hexagonal nut or
slotted ring nut. Coloured nylon nuts are also available for identification purposes. Contacts can be supplied with
our special low noise Ni-Ag
®
‘ST’ or Gold plating and in addition to the standard solder tag version, there are six
different PCB mounting styles available. The S2 can also be supplied with prefitted EMI/RFI screen if required.
When ordering, please state the contact arrangement required, with a plug inserted, using the following code from
the front of the jack socket: B - Break, M - Make, S - Single, N - No Contact. For example, an S2/BMB PC Mounting
type C Black, is a PC-C 3-pole stereo jack socket, 1st contact - ‘Break’, 2nd contact - ‘Make’ and third contact -
‘Break’.
CLIFF
1/4'' S2 Mono & Stereo
Jack Sockets
S2 Coloured Nut S2 Hex Chrome Nut
S2 EMI/RFI Screen
Slotted Ring Nut
Printed Circuit Board Styles
2003 CLIFF
®
c
PC LAYOUT
(COMPONENT SIDE)
Drawings available on request. Contact [e-mail]
Panel Hole:
0.438”
11.11mm