User guide

Clickfree C6 Easy Imaging
Copyright © 2011
Storage Appliance Corporation.
3.
Do not unplug the C6 during the Repair
screen, click
Close Clickfree
and load Windows.
R E -I
MAGING YOUR COMPUTER
1.
Reboot your computer from the C6 as described on page
If you’re not sure how recently your computer was backed up, click
Backup/Recovery
to back up your content once more before you continue (see page
1. Click Advanced
on the EASY
shown. I
f you want to re
used, then click
Start
EVERYTHING on your computer’s
with the system files, applications, and content in the selected backup
Using EASY Fix to Recover from a Hardware Failure
Storage Appliance Corporation.
Do not unplug the C6 during the Repair
process. When you see the Repair Complete
Close Clickfree
and unplug the C6. Your computer will restart as normal
MAGING YOUR COMPUTER
Reboot your computer from the C6 as described on page
14.
If you’re not sure how recently your computer was backed up, click
to back up your content once more before you continue (see page
15).
on the EASY
Fix Welcome screen. The date of the latest backup is
f you want to re
-
image from an older backup, select the backup dates to be
Start
Re-Image .
Note that you cannot select an emergency backup.
EVERYTHING on your computer’s
internal hard drives
will be erased and replaced
with the system files, applications, and content in the selected backup
confirm that you want to continue.
Using EASY Fix to Recover from a Hardware Failure
17
process. When you see the Repair Complete
and unplug the C6. Your computer will restart as normal
If you’re not sure how recently your computer was backed up, click
Emergency
to back up your content once more before you continue (see page
Fix Welcome screen. The date of the latest backup is
image from an older backup, select the backup dates to be
Note that you cannot select an emergency backup.
will be erased and replaced
with the system files, applications, and content in the selected backup
– you must