Specifications

Clickfree C6 Easy Imaging What is Clickfree C6 and How is Clickfree C6 different from other Clickfree Automatic Backup products?
SCHEDULING AUTOMATIC BACKUPS
The Clickfree scheduler runs a backup automatically as long as the C6 is connected to the
computer.
The default scheduler interval is once a day. If you want to change it:
1. Connect the C6 to your computer and wait for the Welcome window to appear.
2. Before the countdown gets to zero, click Options.
3. Click the Scheduler tab. The backup schedule for this computer is shown.
4. Choose the appropriate interval and time to start the backup.
5. Indicate if the scheduled backup should wake the computer from sleep. If this is not
selected, the backup will run the next time the computer is active.
Note: Although a scheduled backup will wake your computer from sleep mode, it will
not run if the computer is hibernating.
6. Click OK.
At the set time interval, a backup is started automatically, with no intervention from you, as
long as the C6 is connected to the computer. However, if your C6 uses password protection,
the scheduled backup is delayed until you enter the password.
WHAT IF THERE IS NOT ENOUGH SPACE ON MY C6?
If you are using the Clickfree C6 Home Backup to backup several computers and run
out of space, you may want to consider using multiple C6s.
While Clickfree is searching for content to back up, it adds up the amount of disk space
needed and compares that with the free space on the C6. If there is not enough free space for
your content, Clickfree will try to remove older backups for the same computer to free up
space (you will be notified before Clickfree attempts to remove your older backups). In the
case where the required space is more than the total size of the Clickfree drive (for example,
there are already backups of other computers or there are non-Clickfree files stored on the
device), Clickfree will prompt you to change the Backup Settings to exclude one or more
folders from the backup or to remove a previously backed up PC.
When the Start Backup button is enabled (turns orange), click Start Backup. Backup
proceeds as usual.
Alternatively, if you have backups from an old computer on the C6 that you don’t need to
keep any more, you could cancel the backup, remove the old computer (see “Removing a
computer” on page 9), and restart the backup.