Instructions/Assembly Guide

WE STRONGLEY RECOMEND THIS UNIT IS ATTACHED TO THE WALL TO PREVENT TOPPLE.
KEEP YOUR PRODUCT SAFE FROM INJURY.
Assembly Steps to attach your furniture to a wall
1. Use a pencil to mark the fixing positions on the wall- ensure the drill hole position under
product top panel.
2. Drill holes (ensure the hole position be hidden by product) and insert wall plug(C) into wall.
3. Attach L Bracket(D) into plug(C) in wall and fasten by screw(A) with screwdriver (not provided).
4. Attach L Bracket(D) on back of product and fasten by screw(B) with screwdriver (not provided).
5. Place the product against the wall, Secure L Bracket(D) to the L Bracket(D) on wall by Lock
Pin(E) as image shown.
Warning:
1. Please note this item need to be fixed on the wall to prevent falling forward when product is
in use.
2. Always ensure intended wall area to be drilled is free from hidden electrical wires, water and
gas pipes.
NB: Wall fixings are included-if not suitable- Please source suitable fixing for your wall type. If in
doubt please consult a qualified trades person.
5