Air Dehumidification System CLI-DH12 | Installation & Operating Instructions
Congratulations on your purchase of a Cli~Mate Air Dehumidification System. This air dehumidifier is compact and stylish in design, quiet, portable and easy to operate. Unit effectively removes moisture from the air creating a drier, healthier room environment. Note: Please read through the instructions carefully before using or installing the product and ensure that the manual is kept in a safe place for future reference.
SPECIAL PRODUCT INSTRUCTIONS PRODUCT SPECIFICATIONS This appliance is designed for household use only. Do not use this unit outdoors, in wet environments or on wet surfaces. Air Dehumidifier Specifications To achieve best performance; make sure all doors and windows are closed before turning on the unit. The appliance air vents and air grilles must not be obstructed at any time. Air flow is required for the unit to operate effectively.
OPERATION CONDITIONS AND SAFETY PRECAUTIONS Read all instructions carefully. • All components need to be installed in accordance with the user manual instructions for correct performance of unit. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• If unit ever tips or falls over when water reservoir is full, immediately unplug the power cord. Ensure unit is dried thoroughly before operation of the unit. • Do not put fingers or other objects in any openings of the unit.
A. PARTS IDENTIFICATION DIAGRAM A. Dry Air Outlet A B. Control Panel C. Handle D. Humid Air inlet E. Air Filter B C F. Continuous Drainage Hose* G. Continuous Drainage Outlet (For hose connection) D H. Water Reservoir E G H * Continuous drainage hose is an extra drainage option; hose does not need to be connected if using the water reservoir to catch condensed water.
B. CONTROL PANEL & KEY PADS C. OPERATION INSTRUCTIONS 1. Plug unit into power socket, unit will beep twice and LED monitor lights will illuminate for one second. 2. Press POWER button to turn unit on. Note: The dehumidification setting is automatically set at CON (continuous dehumidification) and default dehumidification speed is set at High (H). POWER Turns unit ON/OFF. SPEED Allows selection of dehumidification speed (High (H) /Low (L)) Default unit SPEED is set at High (H).
Note: When the ambient relative humidity is 1% lower than the selected relative humidity ratio percentage (RH %), the unit compressor will switch off and unit will operate at a Low (L) speed level. Note: When the ambient relative humidity is 5% higher than the selected relative humidity ratio percentage (RH %), the unit will switch on and unit will operate at the selected SPEED setting.
D. PRODUCT SAFETY FEATURES 3. Failure of Humidity & Temperature Sensor 1. Automatic Defrosting When the connection wire between the humidity and temperature sensor is disconnected, the humidity CON light will blink and switch unit into continuous dehumidifying mode. To ensure the unit operates and performs as stated, the unit has been designed with an Automatic defrost function as frost can be produced on the surface of the evaporator in low temperatures.
E. OPTIONAL CONTINUOUS DRAINAGE INSTALLATION F. MAINTENANCE AND REPAIR 1. Ensure that unit is OFF and unplugged from wall socket. 2. Remove water reservoir out and connect water drain hose to spigot (continuous drainage outlet) as shown in figure 2. Before carrying out any maintenance or cleaning of the unit, make sure that the power to the unit is turned off and power cord is removed from the power socket. 3. The other end of this hose must be placed over a water drain.
G. UNIT NOT USED FOR PROLONGED PERIODS If not using the unit for a prolonged period, switch off and unplug the unit, empty the water reservoir, and allow minimum of two days for unit to dry before packing away. Keep unit in a dry and ventilated place. Repair: If the unit or power cord is damaged, stop using immediately and bring the unit to authorised service center for repair, never attempt to dismantle, repair or modify the unit by yourself. Warranty will be null and void.
H. TROUBLE SHOOTING BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST. Problem Possible Causes What To Do 1. Check connection to wall socket 1. Unit is not plugged into wall socket No Power 2. One of the units product safety features has been activated. 1. Unit is not plugged into wall socket No Air 2. Humidity ratio (if set) has been reached. 3. Air outlet blocked 4. Water Reservoir is full 1. Air ventilation around unit not sufficient Unit Overheating 2.
Problem Loud Noise Possible Causes What To Do 1. Unit not on a level flat surface 1. Reposition or relocate unit onto a flat surface. 2. Faulty internals 2. Call customer care. 1. Water reservoir not installed correctly Water at Base of Unit 2. Continuous drainage hose not connected to spigot properly. 1. Reinstall water reservoir 3. Continuous drainage hose outlet not over water drain 3. Check hose outlet is flowing into water drain. 1. Water Reservoir is Full Beeping Alarm Noise 2.
Your Aquaport 12 Month Repair or Replacement Warranty Conditions Of This Warranty: quaport warrants this appliance to the first purchaser and subject to A the stated conditions: 1. This product has been fully installed in accordance with the user manual installation instructions. Warranty covers any defects in material or workmanship in the manufactured product within the first twelve months from the date of purchase. 2.
CUSTOMER HOTLINE: 1300 764 325 Aquaport Corporation Pty Ltd PO Box 81 Findon SA 5023 Australia Telephone: 1300 764 325 Facsimile: 08 8354 0722 Email: aquaport@aquaport.com.au Web: www.aquaport.com.
