User Manual

8
CONTROL PANEL/BUTTONS
1. Speed Options
Allows selection for desired speed setting
– high, medium, low and sleep. Default
setting at low speed.
Filter timer reset button
Press and hold for 3 seconds to reset
filter timer.
2. Power button
Turns unit on or off.
3. Auto Mode
In this mode, the speed of the air flow/fan
speed will change automatically depending
on the air quality as detected by the dust
and odour sensors.
REMOTE CONTROL
A. On/off
B. Child-safety lock
C. Auto-mode
D. Speed options
E. Sleep mode
F. Off timer options
NOTE
• Avoid storing the remote control in direct
sunlight.
• The battery for this remote control is for
initial use only and will need to be changed.
• When replacing battery, always use
a 3V lithium coin battery.
• When the unit will not be used for an
extended period, remove the battery from
the remote to prevent battery fluid leakage.
C
B
A D
E
F
• For safety reasons, access to the battery
requires removing the small screw with
a small Phillips head screwdriver. Always
ensure the screw is in place when there
is a battery in the remote.