Service manual

Disassembly
2 - 16 Removing the Wireless LAN Module
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, remove the battery (page 2 - 5) and the keyboard (page 2 - 9).
2. The Wireless LAN module will be visible at point (Figure 12a) on the mainboard.
3. Carefully disconnect cables - , then remove screw from the module socket (Figure 12b
).
4. The Wireless LAN module (Figure 12c) will pop-up.
5. Lift the Wireless LAN module (Figure 12d) up and off the computer.
Figure 12
Wireless LAN
Module Removal
a. The Wireless LAN mod-
ule will be visible at point
on the mainboard.
b. Disconnect the cables
and remove the screw.
c. The WLAN module will
pop up.
d. Lift the WLAN module
out.
Note: Make sure you
reconnect the antenna
cable to ‘’1’’ +
‘’2’’socket (Figure
b).
1
1
2
3
4
5
5
5
4
b.
c.
a. d.
2
3
5
1

5. WLAN Module.
•1 Screw