Service manual

Disassembly
Removing the Keyboard 2 - 13
2.Disassembly
5. Remove screws - from the keyboard (Figure 9d).
6. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable . Disconnect the keyboard
ribbon cable from the locking collar socket (Figure 9e).
7. Remove the keyboard (Figure 9f).
7
11
12
12
13
14

14. Keyboard
•5 Screws
d. f.
e.
7 8 9
13
12
1110
14
Keyboard Tabs

Re-Inserting the Keyboard
When re-inserting the keyboard,
align first the four keyboard tabs
(Figure 9f) that are located at
the bottom, to the slots in the
case.
Figure 9
Keyboard Removal
(cont’d.)
d. Remove screws from
the keyboard.
e. Carefully lift the key-
board up, being careful
not to bend the keyboard
ribbon cable . Discon-
nect the keyboard ribbon
cable from the locking
collar socket .
f. Remove the keyboard.