Service manual
Table Of Contents
- Manual
- Preface
- Chapter 1: Introduction
- Overview
- Specifications
- External Locator - Top View with LCD Panel Open
- External Locator - Front & Right Side Views
- External Locator - Left Side & Rear View
- External Locator - Bottom View
- Mainboard Overview - Top (Key Parts)
- Mainboard Overview - Bottom (Key Parts)
- Mainboard Overview - Top (Connectors)
- Mainboard Overview - Bottom (Connectors)
- Chapter 2: Disassembly
- Overview
- Maintenance Tools
- Connections
- Maintenance Precautions
- Disassembly Steps
- Removing the Battery
- Removing the Keyboard
- Removing the Hard Disk Drive
- Removing the Optical (CD/DVD) Device
- Removing the System Memory (RAM)
- Removing and Installing a Processor
- Removing the Fan Unit
- Removing the Wireless LAN Module
- Removing the MSATA Module
- Removing the CCD
- Appendix A: Part Lists
- Appendix B: Schematic Diagrams
- System Block Diagram
- Processor 1/7-DMI, FDI, PEG
- Processor 2/7- CLK, MISC
- Processor 3/7- (DDR3)
- Processor 4/7- Power
- Processor 5/7- GFX PWR
- Processor 6/7- GND
- Processor 7/7- RSVD
- DDR3 SO-DIMM_1
- DDR3 SO-DIMM_2
- PS8625
- PANEL, INVERTER
- VGA PCI-E Interface
- VGA Frame Buffer Interface
- VGA Frame Buffer A
- VGA Frame Buffer C
- VGA I/O
- VGA NVVDD Decoupling
- CRT, Holes
- Lynx 1/9
- Lynx 2/9
- Lynx 3/9
- Lynx 4/9
- Lynx 5/9
- Lynx 6/9
- Lynx 7/9
- Lynx 8/9
- Lynx 9/9
- 3G, WLAN, PCIE, CON
- USB Charge, CCD, TPM, Power Con
- eSATA/USB3.0, LED
- Card Reader (RTL8411)
- HDD, TP, Audio, USB
- HDMI, RJ45, Fan, KBC, LED
- AUDIO CODEC VT1802S
- KBC-ITE IT8587
- 5VS, 3VS, 3.3VM, 5VM
- 1.05V
- VDD3, VDD5
- 1.5V or 1.35V / 0.75VS, 1.5VS
- POWER VCORE
- N14P, NVVDD, PEX, FBVDDQ
- AC IN, CHARGER
- AUDIO BOARD
- POWER SWITCH BOARD
- ODD to HDD BOARD
- Appendix C: Updating the FLASH ROM BIOS

Schematic Diagrams
Processor 7/7- RSVD B - 9
B.Schematic Diagrams
Processor 7/7- RSVD
FC_G6
Has well rPGA EDS
9 OF 9
U26I
RSVD
P10
RSVD
U10
NC
B1
VSS
AR26
VSS
AP27
RSVD_TP
E20
RSVD_TP
E21
RSVD
A2
RSVD
E18
RSVD_TP
AR1
RSVD
K6
RSVD
AM2
RSVD
F5
RSVD
AM26
RSVD
AM27
CFG_19
AP23
CFG_17
AP21
CFG_18
AR23
CFG_16
AR21
CFG_RCOMP
AT31
RSVD_TP
D23
RSVD_TP
D24
RSVD_TP
B23
RSVD_TP
C23
CFG_15
AP25
CFG_14
AN26
CFG_13
AN25
CFG_9
AT23
CFG_8
AR24
CFG_7
AN23
CFG_6
AT25
RSVD_TP
B35
RSVD_TP
C35
VCC
F25
RSVD
AL29
RSVD
AL30
RSVD
W33
RSVD_TP
A35
RSVD_TP
A34
RSVD
AD10
RSVD_TP
AT2
RSVD_TP
AT1
CFG_12
AP26
CFG_11
AP24
CFG_10
AN20
RSVD_TP
W29
RSVD_TP
W28
TESTLO
G26
RSVD
AR33
FC
G6
RSVD_TP
AL25
RSVD_TP
W30
RSVD_TP
W31
TESTLO
W34
CFG_0
AT20
CFG_1
AR20
CFG_4
AT22
CFG_5
AN22
CFG_3
AP22
CFG_2
AP20
VSS
AL31
VSS
AL32
H_CPU_RSVD40
R67 *1K_04
R66 *1K_04
R64 *1K_04
R378 *1K_04
R63 *1K_04
R28
*1K_04
Haswell Processor 7/7 ( RESERVED )
CFG3
CFG5
CFG4
CFG2
CFG6
CFG7
R359 49.9_1%_04
R357 49.9_1%_04
R384 49.9_1%_04
(Default)
NOTE:
PHYSICAL_DEBUG_ENABLED (DFX PRIVACY)
0 : ENABLED SET DFX ENABLED BIT IN DEBUG INTERFACE MSR
1 : DISABLED
(Default)
CFG3
DEFENSIVE PULL DOWN SITE
CFG5
CFG4
CFG2
CFG2
CFG6
CFG[6:5]
PCI EXPRESS STATIC LANE REVERSAL FOR ALL PEG PORTS
1: (DEFAULT)NORMAL OPERATION;
LANE# DEFINITION MATCHES
0: LANE REVERSAL
PCIE Port Bifurcation Straps
11: DEVICE1 FUNTION 1, DEVICE 1 FUNCTION2 DISABLED
10: DEVICE1 FUNCTION1 ENABLED DEVICE1 FUNCTION 2 DISABLED
01: DEVICE 1 FUNCTION 1 DISABLED, DEVICE 1 FUNCTION 2 ENABLED
00: DEVICE 1 FUNCTION 1 ENABLED, DEVICE 1 FUNCTION 2 ENABLED
CFG7
CFG4
CFG Straps for Processor
DISPLAY PORT PRESENCE STRAP
1: DISABLED;
NO PHYSICAL DISPLAY PORT ATTACHED
TO EMBEDDED DISPLAY PORT
0:ENABLED; AN EXTERNAL DISPLAY PORT DEVICE
AN EXTERNAL DISPLAY PORT DEVICE IS CONNECTED
TO THE EMBEDDED DISPLAY PORT
VCCI N5,41
VCCIN
PM_PCH_PWROK 22,36
CFG_RCOMP
R68 1K_04
FC_G6
H_CPU_RSVD30
R29
*2K_1%_04
NOTE:
RESERVE THIS CIRCUIT FOR FUTURE COMPATIBILITY
Sheet 8 of 46
Processor 7/7-
RSVD