Service manual

2 – 29

D ISASSEMBLY

2. DISASSEMBLY

Fax/Modem & IEEE1394 Module Removal

FAX/MODEM MODULE & IEEE1394 MODULE (OPTIONAL)

The Fax/Modem and IEEE1394 Modules are optional.

Part A

Remove the Back Cover. (page 2-4)

Remove the I/O Bracket. (page 2-11)

Part B

IEEE1394 Module Removal

1. Disconnect the IEEE1394 cable from Connector CN16.

2. Disconnect the module with the cable from Connector CN9 on the System Board.

Fax/Modem Module Removal

1. Disconnect the Fax/Modem cable from Connector CN11.

2. Remove 2 screws (A & B).

2. Disconnect the module with the cable from Connector CN21 on the System Board.

EMOVING THE FAX/MODEM &

IEEE1394 M

ODULES

FIG. 2-30

CN11

CN16

CN9